Poly-Optic 14 Part R Retarder 1lb

Poly-Optic 14 Part R Retarder 1lb

£ 28.98 excl. VAT

Poly-Optic 14-Series Part R Retarder slows the cure of Poly-Optic products. For every part of Part R added, an equal part of Part A must be added to the mix. Experiment to determine how much is needed for your application. Do not exceed 4% of the total mixed weight as the product may not cure properly. Example: Add 1% Part R to Poly-Optic 1411 to double the working time from 9 to 18 minutes.

Notes: Slowing the cure also reduces exothermic heating. Exothermic heating causes distortion, waviness and shrinkage especially in castings > 0.5″ thick. For additional information, read the Poly-Optic 14-Series Technical Bulletin.

Product size is 1lb (453gm).

FOR INDUSTRIAL/PROFESSIONAL USE ONLY. 

Based outside of the UK? Please note we have a €150 minimum order spend into the EU when shopping online. There is no minimum spend for delivery to a UK address.
Polytek

Polyteks’ Poly-Optic 14-Series Part R Retarder slows the cure of Poly-Optic products. For every part of Part R added, an equal part of Part A must be added to the mix. Experiment to determine how much is needed for your application. Do not exceed 4% of the total mixed weight as the product may not cure properly. Example: Add 1% Part R to Poly-Optic 1411 to double the working time from 9 to 18 minutes.

Notes:

Slowing the cure also reduces exothermic heating. Exothermic heating causes distortion, waviness and shrinkage especially in castings > 0.5″ thick. For additional information, read the Poly-Optic 14-Series Technical Bulletin.

FOR INDUSTRIAL/PROFESSIONAL USE ONLY.     

Shop our large range of Polytek products.

Weight 0.45 kg
Size

1LB (453GM)
Poly-Optic 14 Part R Retarder 1lb