Introducing Ed Head Armature H2.0, the world’s first water fillable sculpting busts from The Monster Makers.
Completely reengineered and reimagined, Ed Head H2.0 is composed of a special, high-density plastic that can withstand the rigors of mould making and years of continued use with little to no wear. Not only is the Ed Head endlessly reusable, but Mould Making has never been easier. Simply sculpt your character over the form and make your mould.
RAD (Radiant Assisted Demold) Technology™ provides an easy, built in clay release system which dramatically aides in the demolding process for artists and mask makers using wax based clay mediums. Each RAD enhanced headform becomes, in effect, a hot water vessel which efficiently transfers radiant heat from inside the form to the surrounding clay causing a softening effect within the mould.
Moulds made over RAD enhanced forms can be de-moulded rapidly and without difficulty, resulting in a greatly improved mold-making experience. When you are ready to de-mould, simply turn the mold over with the bottom side up, unscrew the included inset bottle cap and fill the head form with hot water. Within minutes, radiant heat will begin to penetrate the clay and into the mould for the easiest demolding experience you’ve ever had. Say goodbye to broken or stuck head forms!
The Ed Head measures 18″ H x 13″ W x 11″ D with a circumference at the brow of 23″ approximately. Head forms are supplied with a black plastic cap to seal the bottom spout.
Notice: Images are for illustration purposes only, please check product size at the time of purchase.
